TG 350

Machine used to prepare the handle sleeves. Every single label is trimmed, single layer, from the tube-shaped bobbin, label which will apply in a later time directly on the product before to be thermo-retracted.

  •   retracted. The trimmer can realize cut in continuous from 10 to 500 mm of width, till a maximum lay-flat of 350 mm ; it can reach till 400 cut per minute, till a maximum working speed of 40 mt/min.

      Along with the trim, which realize both with regulation or manual configuration, this machine is fulfilled with a system which provide to host a die-cut to realize other kind of imprint.